How To do Chrysler Witech Micropod ii VCI With V17.04.27 Witech Micropod 2 software Work With DRB III Emulator

Chrysler Witech Micropod ii VCI is Chrysler Micropod 2 Online Version support programming and diagnosis function. V17.04.27 Witech Micropod 2 Software comes with DRB3 EMULATOR. Below OBD2Tuner.com sharing How To do Chrysler Witech Micropod ii VCI With V17.04.27 Witech Micropod 2 software Work With DRB III Emulator. 

New Chrysler Witech Micropod ii VCI With V17.04.27 Witech Micropod 2 software work online with server

Chrysler Witech Micropod ii VCI from obd2tuner.com Intention:

Trying to find one micropod II that would work properly with DRB Emulation. Especially with Chrysler Crossfire.
Credit to Radius from Mhhauto. You are at your risk.

OBD2Tuner.com How To do Chrysler Witech Micropod ii VCI With V17.04.27 Witech Micropod 2 software Work With DRB III Emulator: 

1: Make a backup copy of the partition from the hard drive included with the obd2tuner.com New Chrysler Witech Micropod ii.
2: Install HDD in laptop
3: Set date to 01/01/17 BEFORE booting from laptop
4: Boot to HDD
5: Allow windows to install drivers, etc, as needed for your laptop and reboot as needed.
6: Once all of that is done, do NOT run obd2tuner.com V17.04.27 Witech Micropod 2 software yet!
7: Turn OFF internet!
8: Navigate to C:ProgramDatawiTECHjserverdatacorestubs
9: Install DRB Emulator stub
10: Install DRB Enhanced emulator stub
11: Install K-Line stub
12: Reboot computer
13: ALLOW internet access
14: Run Flexnet software updater. Do NOT update WiTech!!!
15: Flexnet will find updates for enhanced DRB and K-Line
16: Install K-Line update first
17: Install Enhanced update next.
18: Once updates and downloaded and installed, turn OFF internet and NEVER turn on again!
19: Reboot computer
20: Attach obd2tuner.com New Chrysler Witech Micropod ii to car. When green LED turns on, turn on car ignition
21: Attach USB cable to PC and witech Micropod 2
22: When Windows is done installing drivers, etc, you should show a network connection in the tool tray with no internet access
23: Run Wi-Tech
24: Press “Launch DRB III” button in lower right hand corner
25: Accept EULA
26: DRBiii Emulator will launch.
27: Enjoy.
 
Here is a Mega link to a backup image of working installation.
 
Link to HDD image/backup file of working OFFLINE WiTech installation with working DRB III Emulation:
https://mega.nz/#!gYMC0axD!kicw9OQ9iAF5fK7JAJSUDUR-V5Ujj4DXzT6URGPL7iQ
 
HDD Partition backup made using Image for Linux from Terabyte Unlimited. You can download trial version here:
https://www.terabyteunlimited.com/index.htm
 
Follow instructions to make bootable USB thumbdrive
Copy image file to spare HDD and connect to laptop with USB adapter.
Boot laptop to USB thumbdrive
Follow prompts to restore backup to laptop HDD partition.

Any need for obd2tuner.com Chrysler wiTECH Micropod 2 Chrysler diagnostic tool Mopar Micropod 2 just contact us freely.

For More details information, welcome to Add my Whatsapp (+86 15889512468) or Skype obd2tuner.com) if you have, Your Private Secretary in Car Repair Area! 16 Hours Online at your Service!

www.OBD2Tuner.com- China OBD2 Tuner Tool Automotive Diagnostic Tools Car Key Programmer OBD2 ECU chip tuning tool Center.

Contacts:

Website: www.obd2tuner.com
Skype: OBD2Tuner.com
Email: info@obd2tuner.com
What;s app: +86 15889512468