Mercedes SD Connect Wifi Setup MB SD Connect C4 Wifi Configuration pay attention

Mercedes SD Connect Compact C4 wifi verson supports reading out and erasing trouble code. MB SD Connect C4 With Mercedes scn coding online account support mercedes online programming. Below OBD2Tuner.com sharing Mercedes SD Connect Wifi Setup MB SD Connect C4 Wifi Configuration pay attention.

Mercedes Mux C4 scanner Mercdes sds c4 Super MB Star SD Connect C4 multiplexer


OBD2Tuner.com Mercedes SD Connect Wifi Setup:

1.Click Configuration-MUX-Register/configure, under the "General information", select name "04" and then tick off "Wlan parameters, road"
2.Set the following parameters: IP address: 192.168.2.200, Network screen: 255.255.255.0, Encryption: WEP / Hex, Key: aaaaaaaaaaaaaaaaaaaaaaaaaa (26 a in total)
Note: We have video tutorial, please click column "Video" to watch or contact our customer service to get the video.  

OBD2Tuner.com MB SD Connect C4 Wifi Configuration pay attention:

1) From software 2015.3 on, DAS icon will not shown on the desktop, DO NOT ADD this DAS icon by yourself when you use the software. Otherwise it will cause some error even destroy the software by doing this. We will charge fee if software is destroyed by this way.
2) If you need to use DAS to diagnose your car. Just enter Xentry. If your car need to be done by DAS, then software will switch to DAS interface automatically
3) Battery: When you first time to use this obd2tuner.com MB SD C4, you need to use the 100% brand new battery on the main unit, not rechargable battery! After done, then no need battery for main unit anymore if you use this software all the time. Because this battery is for update. If you use newer software in the future, then when you first time use the newer software, you need to use new battery for update again.
4) For USA configuration DOIT system after 2014. ALL star C3, C4, obd2tuner.com MB SD Connect C4 does not support. For DOIT system after 2014, need to use XENTRY C5 to work.
5) Star software after 2015.1 do not have alone DAS simulaton, you can enter the software from xentry simulation.

For More details information, welcome to Add my Whatsapp (+86 15889512468) or Skype obd2tuner.com) if you have, Your Private Secretary in Car Repair Area! 16 Hours Online at your Service!

www.OBD2Tuner.com- China OBD2 Tuner Tool Automotive Diagnostic Tools Car Key Programmer OBD2 ECU chip tuning tool Center.

Contacts:

Website: www.obd2tuner.com
Skype: OBD2Tuner.com
Email: info@obd2tuner.com
What;s app: +86 15889512468

MB SD Connect C4 Wifi Configuration MB SD Connect Compact C4 Star Diagnosis Wifi setting On windows 10

MB SD Connect C4 With Wifi Card is the most stable and hot Mercedes star diagnosis tool. MB SD Connect Compact C4 Star Diagnosis can work with new V2017.7 Mercedes Xentry/DAS Star Diagnosis Software. Below OBD2Tuner.com sharing MB SD Connect C4 Wifi Configuration MB SD Connect Compact C4 Star Diagnosis Wifi setting On windows 10.

MB SD Connect C4 Wifi Configuration MB SD Connect Compact C4 Star Diagnosis Wifi setting On windows 10


OBD2Tuner.com MB SD Connect C4 Wifi Configuration MB SD Connect Compact C4 Star Diagnosis Wifi setting On windows 10:

I’m running Win10 on a Dell XPS15 9550 laptop with Intel AC 8260 internal wireless card installed.

After days of investigation and testing, the most important thing to understand is this. The drivers for your wireless card MUST support AdHoc functionality. The drivers are the secret sauce that makes this possible. This can be verified at the DOS command prompt. The command is: netsh wlan show drivers

This command will show “Yes” or “No” on the line for “Hosted Network Support”.

If this line says “No”, AdHoc will not work properly.

Although I’m running Win10, Intel has drivers for the 8260 wireless card for Win8 which will enable proper AdHoc functionally.

The trick is to download the driver first, prior to removing your existing wireless driver. Download the driver ONLY, not any driver file with additional driver management apps included in the downloaded file.

Now you can go into Device Manager and remove your existing wireless card AND check the box that removes all software associated with it. My Win8 driver download file was a .exe file. I double clicked on it and the Win8 driver for my Intel 8260 card was installed. Went to Device Manager, right clicked on my 8260 wireless card and selected Properties. Clicked on Advanced and was able to see several AdHoc related entries. These AdHoc entries were not visible using the Win10 drivers.

AdHoc can now be verified at the DOS command prompt. The command is:

netsh wlan show drivers

This command will show “Yes” on the line for “Hosted Network Support”.

If this line says “No”, AdHoc will not work properly

With AdHoc functionality confirmed, additional DOS commands can now be used to enable Road24h wireless connectivity. The procedures for the additional steps required are well documented in MHHAUTO forum or GOOGLE.

This is what worked for me. Depending on your computer skills, your results may vary.

If you find my posting to be of help to you, Thanks and Rep would be most appreciated.

For More details information, welcome to Add my Whatsapp (+86 15889512468) or Skype obd2tuner.com) if you have, Your Private Secretary in Car Repair Area! 16 Hours Online at your Service!

OBD2Tuner.com- China OBD2 Tuner Tool Automotive Diagnostic Tools Car Key Programmer OBD2 ECU chip tuning tool Center.

Contacts:

Website: www.obd2tuner.com
Skype: OBD2Tuner.com
Email: info@obd2tuner.com
What;s app: +86 15889512468